Rod guide rings

Rod guide rings for ISO installation spaces

Product Datasheet

Description

The *FiPk preferred dimensions of piston-and rod guide Rings **RR fit into standard grooves according to ISO 10766.

The primary task of these guide elements, which are designed for low coefficients of friction and high wear resistance, is to absorb the lateral forces acting on the rod and piston and reliably prevent metal-to-metal contact. As a result, both, the service life of the hydraulic cylinder and the overall efficiency of the system, are substantially improved.

Benefits

  • Eliminate metal-to-metal contact
  • Wide range of fluid compability
  • Low friction due to excellent tribological properties of guiding elements
  • Ease of installation and assembly
  • Withstands lateral forces

*Fi1962 APK
**RR Rod Wear Ring

Overview Rod guide rings

Type Material d D H L Item
Rod-guiding Element Fi1962 8 11 3,6 4 2.RR.0080.0110.F1962

Technical specifications

Item number 2.RR.0080.0110.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 11
Inside diameter (d) 8
Width (H) 3,6
Mounting frame length (L) 4
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 0,19 g
Rod-guiding Element Fi1962 10 13 3,6 4 2.RR.0100.0130.F1962

Technical specifications

Item number 2.RR.0100.0130.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 13
Inside diameter (d) 10
Width (H) 3,6
Mounting frame length (L) 4
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 0,24 g
Rod-guiding Element Fi1962 12 15 3,6 4 2.RR.0120.0150.F1962

Technical specifications

Item number 2.RR.0120.0150.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 15
Inside diameter (d) 12
Width (H) 3,6
Mounting frame length (L) 4
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 0,28 g
Rod-guiding Element Fi1962 14 17 3,6 4 2.RR.0140.0170.F1962

Technical specifications

Item number 2.RR.0140.0170.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 17
Inside diameter (d) 14
Width (H) 3,6
Mounting frame length (L) 4
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 0,32 g
Rod-guiding Element Fi1962 16 19 3,6 4 2.RR.0160.0190.F1962

Technical specifications

Item number 2.RR.0160.0190.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 19
Inside diameter (d) 16
Width (H) 3,6
Mounting frame length (L) 4
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 0,36 g
Rod-guiding Element Fi1962 18 21 3,6 4 2.RR.0180.0210.F1962

Technical specifications

Item number 2.RR.0180.0210.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 21
Inside diameter (d) 18
Width (H) 3,6
Mounting frame length (L) 4
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 0,41 g
Rod-guiding Element Fi1962 20 25 5,2 5,6 2.RR.0200.0250.F1962

Technical specifications

Item number 2.RR.0200.0250.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 25
Inside diameter (d) 20
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 1,13 g
Rod-guiding Element Fi1962 22 27 5,2 5,6 2.RR.0220.0270.F1962

Technical specifications

Item number 2.RR.0220.0270.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 27
Inside diameter (d) 22
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 1,23 g
Rod-guiding Element Fi1962 25 30 5,2 5,6 2.RR.0250.0300.F1962

Technical specifications

Item number 2.RR.0250.0300.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand Fi1962
Origin GER
Outside diameter (D) 30
Inside diameter (d) 25
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 1,39 g
Rod-guiding Element Fi1962 28 33 5,2 5,6 2.RR.0280.0330.F1962

Technical specifications

Item number 2.RR.0280.0330.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 33
Inside diameter (d) 28
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 75 Shore D
Material Fi1962
Net weight 1,54 g
Rod-guiding Element Fi1962 30 35 5,2 5,6 2.RR.0300.0350.F1962

Technical specifications

Item number 2.RR.0300.0350.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 35
Inside diameter (d) 30
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 1,64
Rod-guiding Element Fi1962 32 37 5,2 5,6 2.RR.0320.0370.F1962

Technical specifications

Item number 2.RR.0320.0370.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 37
Inside diameter (d) 32
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 1,75
Rod-guiding Element Fi1962 36 41 5,2 5,6 2.RR.0360.0410.F1962

Technical specifications

Item number 2.RR.0360.0410.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 41
Inside diameter (d) 36
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 1,95 g
Rod-guiding Element Fi1962 40 45 5,2 5,6 2.RR.0400.0450.F1962

Technical specifications

Item number 2.RR.0400.0450.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 45
Inside diameter (d) 40
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 2,15
Rod-guiding Element Fi1962 45 50 5,2 5,6 2.RR.0450.0500.F1962

Technical specifications

Item number 2.RR.0450.0500.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 50
Inside diameter (d) 45
Width (H) 5,2
Mounting frame length (L) 5,6
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 2,40 g
Rod-guiding Element Fi1962 50 55 9,3 9,7 2.RR.0500.0550.F1962

Technical specifications

Item number 2.RR.0500.0550.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 55
Inside diameter (d) 50
Width (H) 9,3
Mounting frame length (L) 9,7
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 4,75 g
Rod-guiding Element Fi1962 63 68 9,3 9,7 2.RR.0630.0680.F1962

Technical specifications

Item number 2.RR.0630.0680.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 68
Inside diameter (d) 63
Width (H) 9,3
Mounting frame length (L) 9,7
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 5,94 g
Rod-guiding Element Fi1962 70 75 9,3 9,7 2.RR.0700.0750.F1962

Technical specifications

Item number 2.RR.0700.0750.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 75
Inside diameter (d) 70
Width (H) 9,3
Mounting frame length (L) 9,7
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 6,58 g
Rod-guiding Element Fi1962 80 85 9,3 9,7 2.RR.0800.0850.F1962

Technical specifications

Item number 2.RR.0800.0850.F1962
Material Fi1962

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product Datasheet Material Datasheet CAD Model 2D-Drawing
Contact Quotation Request

Product attributes

Type Rod-guiding Element
Brand FiPur®
Origin GER
Outside diameter (D) 85
Inside diameter (d) 80
Width (H) 9,3
Mounting frame length (L) 9,7
Profile (P) RR
Shore hardness 74 Shore D
Material Fi1962
Net weight 7,49 g

Deviating installation spaces on request.