Double wiper for ISO installation spaces

Description

The FiPur® preferred dimensions of the double wiper profile *DW fit in the grooves according to DIN ISO 6195 type C. By the combination of wiper lip and secondary sealing lip a very thin residual lubricating film is achieved on the rod, which leads to extremely low leakage.

Benefits

  • Outstanding abrasion and extrusion resistance
  • Wide range of fluid compabilities
  • Materials available for extended fluid compatibility required in food technology and biodegradable hydraulic media
  • Excellent assembly ability
  • Excludes environmental containments
  • Custom dimensions can be delivered quickly using our turning capabilities

 

*DW - Double Wiper 

Overview Double wiper

Type Material d D H L Item
Double-lip Wiper FiPur® 100 10 16 4,8 4 2.DW.0100.0160.FP100

Technical specifications

Item number 2.DW.0100.0160.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 16
Inside diameter (d) 10
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 0,52
Double-lip Wiper FiPur® 100 12 18 4,8 4 2.DW.0120.0180.FP100

Technical specifications

Item number 2.DW.0120.0180.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 18
Inside diameter (d) 12
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 0,59
Double-lip Wiper FiPur® 100 14 20 4,8 4 2.DW.0140.0200.FP100

Technical specifications

Item number 2.DW.0140.0200.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 20
Inside diameter (d) 14
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 0,67
Double-lip Wiper FiPur® 100 16 22 4,8 4 2.DW.0160.0220.FP100

Technical specifications

Item number 2.DW.0160.0220.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 22
Inside diameter (d) 16
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 0,75
Double-lip Wiper FiPur® 100 18 24 4,8 4 2.DW.0180.0240.FP100

Technical specifications

Item number 2.DW.0180.0240.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 24
Inside diameter (d) 18
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 0,83
Double-lip Wiper FiPur® 100 20 26 4,8 4 2.DW.0200.0260.FP100

Technical specifications

Item number 2.DW.0200.0260.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 26
Inside diameter (d) 20
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 0,91
Double-lip Wiper FiPur® 100 22 28 4,8 4 2.DW.0220.0280.FP100

Technical specifications

Item number 2.DW.0220.0280.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 28
Inside diameter (d) 22
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 0,98
Double-lip Wiper FiPur® 100 25 31 4,8 4 2.DW.0250.0310.FP100

Technical specifications

Item number 2.DW.0250.0310.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 31
Inside diameter (d) 25
Width (H) 4,8
Mounting frame length (L) 4
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 1,10
Double-lip Wiper FiPur® 100 28 36 5,8 5 2.DW.0280.0360.FP100

Technical specifications

Item number 2.DW.0280.0360.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 36
Inside diameter (d) 28
Width (H) 5,8
Mounting frame length (L) 5
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 2,06
Double-lip Wiper FiPur® 100 32 40 5,8 5 2.DW.0320.0400.FP100

Technical specifications

Item number 2.DW.0320.0400.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 40
Inside diameter (d) 32
Width (H) 5,8
Mounting frame length (L) 5
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 2,32
Double-lip Wiper FiPur® 100 36 44 5,8 5 2.DW.0360.0440.FP100

Technical specifications

Item number 2.DW.0360.0440.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 44
Inside diameter (d) 36
Width (H) 5,8
Mounting frame length (L) 5
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 2,57
Double-lip Wiper FiPur® 100 40 48 5,8 5 2.DW.0400.0480.FP100

Technical specifications

Item number 2.DW.0400.0480.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 48
Inside diameter (d) 40
Width (H) 5,8
Mounting frame length (L) 5
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 2,85
Double-lip Wiper FiPur® 100 45 53 5,8 5 2.DW.0450.0530.FP100

Technical specifications

Item number 2.DW.0450.0530.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 53
Inside diameter (d) 45
Width (H) 5,8
Mounting frame length (L) 5
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 3,15
Double-lip Wiper FiPur® 100 50 58 5,8 5 2.DW.0500.0580.FP100

Technical specifications

Item number 2.DW.0500.0580.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 58
Inside diameter (d) 50
Width (H) 5,8
Mounting frame length (L) 5
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 3,47
Double-lip Wiper FiPur® 100 56 66 6,8 6 2.DW.0560.0660.FP100

Technical specifications

Item number 2.DW.0560.0660.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 66
Inside diameter (d) 56
Width (H) 6,8
Mounting frame length (L) 6
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 5,68
Double-lip Wiper FiPur® 100 63 73 6,8 6 2.DW.0630.0730.FP100

Technical specifications

Item number 2.DW.0630.0730.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 73
Inside diameter (d) 63
Width (H) 6,8
Mounting frame length (L) 6
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 6,49
Double-lip Wiper FiPur® 100 70 80 6,8 6 2.DW.0700.0800.FP100

Technical specifications

Item number 2.DW.0700.0800.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 80
Inside diameter (d) 70
Width (H) 6,8
Mounting frame length (L) 6
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 6,92
Double-lip Wiper FiPur® 100 80 90 6,8 6 2.DW.0800.0900.FP100

Technical specifications

Item number 2.DW.0800.0900.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 90
Inside diameter (d) 80
Width (H) 6,8
Mounting frame length (L) 6
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 7,88
Double-lip Wiper FiPur® 100 90 100 6,8 6 2.DW.0900.1000.FP100

Technical specifications

Item number 2.DW.0900.1000.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 100
Inside diameter (d) 90
Width (H) 6,8
Mounting frame length (L) 6
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 8,78
Double-lip Wiper FiPur® 100 100 110 6,8 6 2.DW.1000.1100.FP100

Technical specifications

Item number 2.DW.1000.1100.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 110
Inside diameter (d) 100
Width (H) 6,8
Mounting frame length (L) 6
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 9,77
Double-lip Wiper FiPur® 100 110 125 9,5 8,5 2.DW.1100.1250.FP100

Technical specifications

Item number 2.DW.1100.1250.FP100
Material FiPur® 100

Minimum requirements on the surface quality of the counterparts of seals made of FiPur®

Dynamic seals

Rmax 0,8 bis 2,5 μm
Rmr * (c) 60-80%

* Measured at a cutting width c of 25% of the Rmax value from an imaginary reference zero line where the contact ratio is 5%.

Product attributes

Type Double-lip Wiper
Brand FiPur®
Origin GER
Outside diameter (D) 125
Inside diameter (d) 110
Width (H) 9,5
Mounting frame length (L) 8,5
Profile (P) DW
Shore hardness 94 Shore A
Material FiPur® 100
Net weight 22,24

Larger installation spaces on request.